TechManPatCOMPARE
← Back to battery catalogue

Residential battery comparison profile

Solplanet

Solplanet
AP-L Low-Voltage Series

Four outdoor-rated low-voltage battery models for Solplanet hybrid systems.

Research-based opinionConfirmed Australian residential pageChecked 13 November 2026
Solplanet brand mark used because a reusable Australian product image is not yet available13.92–16.08 kWh
01

Manufacturer-sourced facts

What it is.

These are product facts, not a score or endorsement.

Request an installed quote for the exact inverter, battery stack and backup hardware.

Usable capacity range
13.92–16.08 kWh
Published output
7.68–8.19 kW rated DC per unit, depending on model
Architecture
DC-coupled
Phase support
Single-phase
Backup
System dependent
Warranty
Confirm the Australian term for the quoted model
Cell chemistry
LFP
CEC status checked
The CEC lists all four AP-L battery models through 31 December 2027. The inverter has a separate listing.
Standout specification
Four pre-assembled IP66 models with distinct CEC-listed usable capacities
Show 4 model variants

These model names sit inside the family above. Capacity, phase and output still need to match the installed configuration.

  • APL8.0D-S2
  • APL15.0D-S
  • APL15.0-S
  • APL8.0-S2
02

Our opinion

The buying view.

EDITORIAL OPINION - BASED ON THE CITED RESEARCH
“Solplanet’s September 2026 compatibility table names APL8.0-S2 and APL15.0-S with the listed H-S2 and 8–10 kW SH inverters. Ask for the installed price and the exact inverter and firmware.”
Best suited to
Checking a single-phase Solplanet quote with around 14–16 kWh of usable storage per unit
What stands out
Four pre-assembled IP66 models with distinct CEC-listed usable capacities
03

Cons and watch-outs

What to check before buying.

These are configuration trade-offs and questions to verify, not claims that the product is defective.

  • The D variants have lower usable capacities and require their own written compatibility confirmation.
  • Battery-only output can be lower than the inverter’s AC rating. Confirm usable energy over the inverter’s supported voltage range and any parallel design with the installer.

Ask for these points to be answered against the exact model numbers and installed configuration in your quote.

04

Evidence trail

Check the sources.

Specifications can change by model revision, region and paired hardware. CEC approval is not proof of current availability or suitability. Confirm the model and final design with the manufacturer and an accredited Australian installer.

Solplanet Australia - AP-L 8.0 seriesOpen manufacturer source ↗Solplanet Australia - AP-L 15.0 seriesOpen supporting source ↗Solplanet - September 2026 compatibility tableOpen supporting source ↗Solplanet - Australian H-S2 datasheetOpen supporting source ↗Solplanet - Australian 8–10 kW SH datasheetOpen supporting source ↗Clean Energy Council - approved batteriesOpen supporting source ↗CEC series: AP-LSearch the household-scale approval register →Is something outdated or incorrect?Contact TechManPat with an update →

Evidence check

Last checked

Australian sources
Specifications last checked
13 November 2026
Price last checked
No separate price check recorded
Australian availability last checked
13 November 2026

What changed

No material change logged.

Report incorrect information →
← Back to all home batteriesSuggest a correctionAI citation guide →