Reolink’s OMVI 2i Ultra watches two ways. Australia still has to wait.

Two views, with different jobs

A tracking camera has an obvious attraction: something moves, and the camera follows it. The less exciting question is what happens to the scene it was watching before. Reolink’s OMVI 2i Ultra tackles that with two cameras doing different jobs, which could be handy for a driveway with a gate off to one side.

The Australian product page lists an upper 4K fixed camera and a lower 3K pan-tilt camera. That is not two 4K feeds. The lower unit can pan 355 degrees and tilt 55 degrees; the upper camera is aimed manually and does not motor around through the app.

I like the logic of keeping an overview while following a visitor. Whether it catches the useful detail at your gate is another question. This is a specification-based preview; I have not tested its tracking, night footage or battery life.

Solar helps, but the wall still matters

The removable battery is rated at 10,000mAh, paired with an external 6W SolarEase panel. The panel can be mounted with the camera or positioned separately. That flexibility matters if the useful camera angle lives under an eave while the sunshine is several metres away.

Reolink’s support FAQ qualifies the six-month battery claim with just five minutes of recording a day plus standby. A busy driveway is a different workload. I would treat the figure as a stated test scenario, not permission to forget where the ladder lives.

Walk around the proposed spot before buying. Check the view, sunlight and Wi-Fi where the camera will actually sit, rather than where your phone gets excellent reception beside the router. Solar charging cannot fix a mounting position that misses the action. Try the view at the height you intend to use, including the path a visitor takes towards the door.

Recording and updates need a look

The Australian specification table lists motion-triggered recording and no pre-recording. There is a microSD slot supporting up to 512GB, but no card included. Budget for storage and decide whether event clips suit your purpose before treating this as a continuous-recording security setup.

Software is another buying check. Reolink specifies app 4.63 or later and desktop client 8.21 or later for standalone functionality. Auto Framing requires app 4.64, which the FAQ still describes as expected in late October. Its NVR support is scheduled for firmware 4.0 in November.

Those are expected releases, not confirmation they have arrived. Check the versions actually available for your phone and recorder. SyncTrack and PinPoint also need a PTZ calibration after installation. A few minutes doing that properly beats repeatedly blaming the possum.

Worth watching, once there is a local offer

As checked on 24 October, the Australian page still says Coming Soon. I could not verify an Australian selling price or a local shipping date. Overseas checkout prices and a general shipping policy do not fill that gap.

My interest is in the two-view arrangement, particularly where one fixed scene and one moving target need attention. Before committing, I would want a confirmed local offer, working software for the intended setup and footage that shows the detail I actually need. Use our security-camera comparison to work through placement and recording needs while we wait.