The short version

What you need to know.

  • SharpLoop automatically sharpens rotary blades at the charging station when needed, according to PUDU.
  • Three announced versions target lawns from 1,500 to 5,000 m². Garden layout, maintenance and local servicing still matter.
  • No Australian price or sale date was verified. “Early spring 2027” does not specify a hemisphere.
01

A mower that looks after its cutting edge

Robot mowers promise to give you your weekends back. PUDU's TOMO S Series takes aim at another job that remains after the mowing is automated: keeping the blades sharp.

Announced on 3 November, the range uses a system called SharpLoop to sharpen its rotary blades at the charging station when required. PUDU says three versions will cover lawns from 1,500 to 5,000 square metres, with sales expected in “early spring 2027”.

That seasonal wording does not identify a hemisphere. It should not be read as a confirmed Australian spring launch. As checked on 10 November 2026, Compare could not verify an Australian price or on-sale date. This is a preview of an announced product, not something we have tested or a local buying recommendation.

02

Less blade work would be a useful upgrade

Automatic sharpening is an appealing idea because it addresses ownership after the first impressive demonstration. The question is how much work and expense it removes over several seasons, rather than whether the robot can perform one tidy pass across a lawn.

PUDU describes a cycle of mowing, returning to the station and sharpening as needed. Its cutting system also uses two 636 W motors, with blades running at up to 6,000 rpm and a rear channel for discharging clippings. Those are manufacturer specifications, not measurements from Compare.

Before treating it as a maintenance-free mower, ask what the sharpening mechanism itself needs. The useful ownership details will include replacement-part prices, service intervals and the procedure after a blade strikes something it should not. Saving routine blade changes would be valuable, but a difficult repair could quickly change the calculation.

03

Navigation and edges still need proving

The Australian-region product page describes boundary-wire-free mapping using LiDAR, AI vision and network RTK positioning, without a local RTK reference station. It also lists all-wheel drive, slopes up to 45 degrees and obstacle crossing up to 6 cm. These remain claimed capabilities, not guarantees for every garden.

The edge-cutting arrangement combines an offset cutting deck with side sensing and a responsive bumper. PUDU also promotes a rear-wheel zero-turn system intended to reduce lawn disturbance. Both deserve close attention in a proper test: the strip beside a fence and the marks left by repeated turns are everyday details that a specification sheet cannot settle.

For an Australian yard, start with a simple sketch. Mark separate lawn areas, narrow passages, steep sections, raised garden beds and the route back to the charger. Ask the supplier to explain how that layout fits the exact model, including any connectivity requirements or ongoing charges. A large quoted lawn capacity alone does not answer those questions.

04

What to wait for in Australia

An Australian-region website is useful, but it is not the same as confirmed stock, a local warranty process or a nearby repair option. The next meaningful announcement should name the models coming here, their prices, delivery timing and who will support them.

There is enough in TOMO S to make it worth watching. Self-sharpening could be a more practical improvement than another headline navigation claim. Until the local package and real-world performance are clearer, compare the whole ownership proposition: mowing coverage, remaining edge trimming, maintenance, replacement parts and support.

If you need a mower sooner, use Compare's robot-mower comparison to narrow the field, then confirm current Australian stock and suitability with the seller. Do not put a necessary purchase on hold for an overseas seasonal estimate.

Sources

Read the evidence.

  1. TOMO S announcement, 3 November 2026PUDU Robotics ↗
  2. Manufacturer release distributed by PR NewswirePUDU Robotics / PR Newswire ↗
  3. Australian-region product informationPUDU Home ↗

Product launch preview based on primary manufacturer information checked on 10 November 2026 (Australia/Perth). No Compare hands-on testing. Australian pricing, availability and local support are unconfirmed. The PR Newswire release is the manufacturer’s syndicated announcement, not independent corroboration.